Autoclaved Aerated Concrete - Testings & Approvals p.3

TEST / Report / Publication	Description of procedure / project
ASTM E 90 & ASTM C 423	Standard Method for Laboratory Measurement of Airborne Sound Transmission Loss of building Partitions" & " Test method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room method"
Various Thermal and research and studies for code compliance and load calculation
K908	8 INCH FLOOR PANELS
K909	4-10 INCH FLOOR PANELS- Nominal 4 inch thick slab can be used only for 1 hr restrained and unrestrained ratings. Panels to have a minimum 3 in. bearing.
K910	8 INCH FLOOR PANELS
P931	8 INCH FLOOR PANELS WITH SPECIFIC CROSS SECTION
P932	4 -10 INCH FLOOR PANELS WITH SPECIFIC CROSS SECTION
P933	8 INCH FLOOR PANELS WITH SPECIFIC CROSS SECTION
U205	MATRIX PAAC, min 2 in. thick and max. 2-ft wide panel fastened to the steel studs on both sides of the studs with type S3 hex head type self-drilling, self-tapping screws. Min. 2 fasteners per panel at each stud.
U206	MATRIX PAAC, min. 2 in. thick and max 2 ft wide panel installed between a). Min. 6 AAC blocks, min. 8" AAC wall panel or concrete blocks or b). Any 1hr or 2hr rated stud wall assembly constructed of material and manner described in the individual U300 or U400 series Wall or Partition Design in the UL Fire Resistance Directory. Refer to UL Directory for additional detail.
U207	EXTERIOR CLADDING AND OTHER WALL ASSEMBLY. REFER TO UL DIRECTORY FOR ADDITIONAL DETAIL.
U208	POWERPANEL ASSEMBLY WITH STEEL OR WOOD STUDS. TYPICALLY SPECIFIED FOR PARTY WALL CONSTRUCTION. REFER TO UL DIRECTORY. FIRE RATING DEPENDS ON THICKNESS. 2 HR FOR 2" THICKNESS; 3 HR FOR 3" THICKNESS; 4 HR FOR 4" THICKNESS

Email: info@mhe-international.com